6F3B0250
Basic Hardware and Function
1
CE Marking
The Programmable Controller PROSEC T1 and T1S (hereafter called T1/T1S) complies with the
requirements of the EMC Directive 89/336/EEC and Low Voltage Directive 72/23/EEC under the
condition of use according to the instructions described in this manual.
The contents of the conformity are shown below.
Application of EMC : 89/336/EEC (as amended by 91/263/EEC and 92/31/EEC)
Council Directive LVD : 72/23/EEC (as amended by 93/68/EEC)
Manufacture’s Name : Toshiba Corporation, Fuchu Works
Address : 1, Toshiba-Cho
Fuchu-shi
TOKYO 183
Japan
declares, that the product
Product Name : Programmable Controller , T1 Series
Model Number : TDR116*6S, TAR116*6S, TDR116*3S
TDR128*6S, TAR128*6S, TDR128*3S
TDR140*6S, TAR140*6S, TDR140*3S
TDR140S6S, TAR140S6S, TDR140S3S
conforms to the following Product Specifications:
EMC
Radiated Interference : EN 55011 Group 1 Class A
Mains Interference : EN 55011 Group 1 Class A
Radiated Susceptibility : ENV50140
Conducted RFI Susceptibility : ENV50141, IEC100-4-6.
Electrostatic Discharge : IEC1000-4-2
Electrical Fast Transient : IEC1000-4-4
LVD : EN61131-2:1995 3.10 Dielectric Properties
4. Mechanical Requirements
Supplementary information :
(1) Included Handy Programmer THP911A*S.
(2) Included each type of associated input/output unit in a typical configuration.
(3) Product must be installed in accordance with manufacturers instructions
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
Need help?
General
