6F3B0250
Basic Hardware and Function
7
Safety Precautions
Safety Label
The safety label as shown on the right is
attached to the power terminal of the
T1/T1S.
Remove the mount paper before wiring.
Peel off the label from the mount paper
and stick it near the power terminals
where it can be readily seen.
Contact Toshiba if the label is damaged.
!
Do not touch terminals
while power on.
CAUTION
Hazardous voltage can shock, burn or cause death.
Do not touch terminals while power on.
Read related manual thoroughly for safety.
Stick this seal on unit or near unit.
Take off this sheet before wiring.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
Need help?
General
