Direct Access Parameter Information
Q9 Plus ASD Install/Op Manual
https://www.toshiba.com/tic/ 261
3039 FE39 RX2 (AI1 Option) Option Input 1%
3040 FE40 FM Output 1
3041 FE41 AM Output 1
3050 FE50 Communication Data Output 2
3051 FE51 Communication Data Output 1
3052 FE52 Communication Data Output 3
3060 FE60
My Function Monitor 1 (Output of Unsigned
Value)
3061 FE61
My Function Monitor 2 (Output of Unsigned
Value)
3062 FE62
My Function Monitor 3 (Output of Signed
Value)
3063 FE63
My Function Monitor 4 (Output of Signed
Value)
3066 FE66 Expansion I/O Card 1 CPU Version
3067 FE67 Expansion I/O Card 2 CPU Version
3076 FE76 Integral Input Power 0.01 kW
3077 FE77 Integral Output Power 0.01 kW
3084 FE84 16-Bit BIN/BCD Input Value 1
Note 1: If no PG feedback is used, an estimated speed value is displayed.
Note 2: My Function cannot process negative values. A negative value is processed by My Function as
an absolute value.
Table 14. Input Function Target Selections and the Associated Communications Number. (Cont)
Input Setting/Communication Number
Function Resolution/Unit
FM/AM/FP
Input Set-
ting
Comm.
Number
Monitor Dis-
play Input
Setting
Comm.
Number
To Next Page
Loading...
