User’s Manual 8-18
AV functions
3. The Set Up Your TV Signal window is displayed, and click Next.
4. Follow the screen instructions and configure settings according to the
environment used.
Listen to radio
This section describes how to set up and use of FM software to listen to
radio.
Setting FM software
1. Activate Media Center.
2. Click in the following order: click Tasks -> settings -> TV -> Set Up TV
Signal.
3. Follow the wizard to select your region.
4. Select I will manually configure my TV signal in the Automatic TV
Signal Setup screen.
5. Select Antenna in the Select Your TV Signal screen.
Starting FM software
1. Activate Media Center.
2. To launch the FM software, scroll to Music and then click radio -> FM
Radio.
3. The FM radio screen is displayed. To find a radio station, click - button
or + button below the Seek or Tune. If you know the frequency of the
station, enter the numbers.
4. To save the station which you found, click a Save as Preset button.
5. Enter the name of the station, and click a Save button.
Changing of presets
1. Activate Media Center.
2. To launch the FM software, scroll to Music and then click radio ->
presets.
3. Click a preset which you want to edit.
4. To find a radio station, click - button or + button below the Tune.
5. To save the station which you found, click a Save as Preset button.
6. To change the preset name, click an Edit Preset. Change the name of
the station in the Edit Preset screen, and click a Save button.
Image data cannot be imported, edited, watched or saved to DVD by
connecting the Media Center model to external devices such as TV, video
deck or analog video camera.
To Next Page
Loading...
