User’s Manual 9-19
Optional Devices
Using REGZA Link (PC Control)
Toshiba notebooks with REGZA Link (PC Control) include a Toshiba utility
dedicated to take advantage of its capabilities which can allow you to:
■ Use the TV remote control to output the computer screen onto the TV
screen.
■ Use the TV remote control to launch, operate and close applications on
your computer.
■ Turn on the TV when the HDMI output is selected using the Fn + F5
key.
■ Switch the video output (HDMI or LCD) when executing certain desktop
icons.
■ Enable/Disable the REGZA Link (PC Control) function on the computer.
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as:
■ Digital video cameras
■ Hard disk drives
■ Magneto Optical drives
■ Writable optical disc drives
Precautions
■ Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer. TOSHIBA assumes no liability for such loss of data.
■ Do not transfer data in areas where static electricity is easily generated
or in areas subjected to electronic noise. Data can be destroyed.
■ If you are transferring data through an IEEE1394 hub, do not connect or
disconnect other devices from the hub during data transfer. There is a
likelihood that data will be damaged. Connect all devices to the hub
before you turn on the computer’s power.
■ You may not use any copyrighted video or music data copied from a
video camera except for your personal enjoyment.
■ If you connect/disconnect an i.LINK device to/from another i.LINK
device that is currently exchanging data with the computer, data frames
might be dropped.
Some models are supported with the REGZA Link (PC Control).
i.LINK uses a four-pin connector, which does not carry any electric current.
External devices will need their own power supply to operate.
To Next Page
Loading...
Need help?
General