User’s Manual 4-15
Operating Basics
Using optical disc drives
The full-size drive provides high-performance execution of CD/DVD-ROM-
based programs. You can run either 12 cm (4.72") or 8 cm (3.15")
CD/DVDs without an adaptor. An ATAPI interface controller is used for
CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drives section for precautions on writing to CDs/DVDs.
Loading discs
To load CD/DVDs, follow the steps as detailed below:
1. When the computer’s power is on, press the eject button to open the
disc tray slightly.
Figure 4-6 Pressing the eject button
2. Grasp the disc tray gently and pull until it is fully opened.
Figure 4-7 Pulling the disc tray open
Use the DVD playback application to view DVD-Video discs.
Disc tray
Eject button
Disc tray
Eject button
To Next Page
Loading...
Need help?
General