Remarks
RAS-3M31SAH-E-1
No.
•
‚
Part name
Front panel
Upper unit
Procedure
1) After stopping the operation of the air conditioner, be
sure to turn off main power supply switch and
breaker of outdoor unit and indoor unit.
2) Remove the L-shape holder (Right). (8 screws)
3) Remove the L-shape holder (Left). (5 screws)
4) Remove the front cover.
5) Remove the rear cover. (4 screws)
6) Remove the electrical parts cover.
Upper unit: 2 screws
Lower unit: 4 screws
7) Remove the cord clamps.
Upper unit: 2 screws
Lower unit: 6 screws
8) Remove the front cabinet.
Upper unit: 4 screws
Lower unit: 3 screws
• Pull the front lower position toward you, and
remove it putting out upward.
1) Perform the process • above.
2) Remove the base plate (Right). (2 screws)
3) Remove the base plate (Left). (3 screws)
4) Remove the upper unit pulling it toward you.
To Next Page
Loading...
