Condition Setting (Day, time, mode & temperature settings)
Press the “ “button to select option
“2 Condition setting” then press the “ Set” [F2] button.
The current settings appear.
a) Press the “ [F1]” button to confirm
the settings for each day
b) Press the “ [F2]” button to confirm
the current settings, 8 different settings appear
1) Press the “ “ button
2) Press the “ “ button to
select the day to set then press the “ [F1]” button.
3) Press the “ “ button to select “ON / OFF”
Select “ON” to set start time and set temperature settings.
Select “OFF” to set the stop time.
“- - “indicates that item has not been set.
4) Press the“ [F2]” button to select time or
temperature. When “- - “is displayed, time or
temperature cannot be selected.
5) Press the “ “ button to set time
or temperature.
6) Press the “ [F1]” to program the next pattern.
Up to 8 patterns per day can be programmed.
7) Press the “ “button.
Screen returns to the day selection screen.
8) Press the “ “ button to select
the next day to set.
Repeat steps 3 to 8 above to program the running
patterns for each day.
9) Press the “ “button.
Press the “ [F1]” to confirm
Press the “ [F2]” to return to the setting screen.
To Next Page
Loading...
