Holiday (Day omit) setting.
1) From the “Scheduled timer screen”
Press the “ “button to
Select option “3 Holiday setting”
2) Press the “ [F2]” button.
3) Press the “ [F1] button to
select the day, and then press the “ [F2]”
button to set.
Press “ [F2]” button
So that “ “is displayed on the day when the
Schedule timer is NOT used
Energy Saving Function.
1) Press the “ “ button to
display the “Menu screen”
2) Press the “ “ button to
Select option “9 Energy Saving”
3) Press the “ [F2]” button.
Energy Saving Ratio.
1) Press the “ “ button to
Select option “2 Energy Saving Ratio”
2) Press the “ [F1] or
“ [F2] to set the value.
The energy saving ratio can be set within the
range from 50% to 100% by 1% increments.
The lower the value is set, the higher the power
saving effect.
Set the function that changes the temperature back to the specified temperature
automatically if the temperature has been changed at the remote controller