4.3 PC Card 4 Replacement Procedures
4.3 PC Card
Removing a PC Card
To remove a PC Card, follow the steps below:
1. Click the Safely Remove Hardware icon on the Task Bar.
2. Click the PC Card to remove.
3. Push the PC card eject button. The button pops out when you release it.
4. Push the eject button again to pop the PC card out slightly.
5. Grasp the PC card and pull it out from the slot.
Figure 4-3 Removing the PC card
6. Press the eject button back into place, if necessary.
Satellite P200D/P205D Series Maintenance Manual
[CONFIDENTIAL]
4-9
To Next Page
Loading...
