4.13 Wireless LAN Unit 4 Replacement Procedures
Satellite P200D/P205D Series Maintenance Manual
[CONFIDENTIAL]
4-37
Installing the Wireless LAN Unit
To install the wireless LAN unit, follow the steps below and refer to the figures in the
preceding section.
1. Fit the wireless LAN unit into its connector on the system board and gently press down.
CAUTION: Do not touch the connectors on the wireless LAN unit or on the
computer. Debris on the connectors may cause malfunction.
2. Secure the wireless LAN unit to the system board with two M2x2.5 screws.
3. Attach the white antenna to the Main connector, and the black antenna to the Aux
connector.
To Next Page
Loading...
