CIX40 Installation
CIX40 Installation
Inspection
Strata CIX40 Installation & Maintenance 5/06 1-7
CIX40 Processor Optional Subassembly
Optional BSIS (Serial Port Interface) subassembly – can be attached to the GCTU2 processor to
provide up to four RS-232 interface ports; one port for an SMDR interface to Call Accounting
devices, one port for SMDI to external Voice Mail devices, and two other applications.
Note The GVPH1 does not require a BSIS SMDI port.
Inspection
1. When the system is received, examine all packages carefully and note any visible damage. If
any damage is found, do not open the packages. Contact the delivery carrier immediately and
make the proper claims.
2. After unpacking (and before installing), check the system against the packing list and inspect
all equipment for damage. If equipment is missing or damaged, contact your supplier
immediately.
3. Be sure to retain original packaging materials for re-use when storing or transporting system
hardware.
Packaging and Storage
CAUTION! When handling (installing, removing, examining) PC Bs, do not touch the
back (soldered) side or edge connector. Always hold the PCB by its edges.
! When packaging and storing the system, remove PCBs from the system cabinet. PCBs should
be packaged in their original antistatic bags for protection against electrostatic discharge. Be
sure to package equipment in its original shipping containers.
To Next Page
Loading...
