CIX40 Installation
Installing the CIX40 Cabinet
1-12 Strata CIX40 Installation & Maintenance 5/06
Installing the CIX40 Cabinet
Check the items shipped.
• CHSU40A cabinet
• GMAU2 motherboard and GCTU2 processor PCB
• AC adapter
• Tie wrap for cable clamp
• Tie wrap for AC adapter
• Velcro strap for AC adapter cord
Step 1: Mount the Cabinet on the Wall
The Base cabinet is designed to be mounted on a wall or other vertical surface.
!
To mount the CIX40 Cabinet
1. Make sure the location for the CIX40 meets the minimum clearance requirements specified in
Figure 1-6 on page 1-8.
2. Loosen the screws on the front cover and the side cover of the cabinet, remove the covers
(see Figure 1-9).
Figure 1-9 CIX40 Cabinet Exterior
WARNING! To prevent electrical shock, make sure the power supply switch is turned Off.
Cover Screws (6)
Side Cover
DC Power LED
Base Cover
Model: CHSU40A
Strata CIX40
Label on edge of cabinet.
All cover screws (6)
must be removed before
mounting the cabinet.
To Next Page
Loading...
