Strata CIX40 Installation and Maintenance 7/06 2-1
CIX40 IP Telephony
CIX40 IP Telephony 2
This chapter introduces IP telephones and Strata Net IP on the Strata CIX40 system. It includes
information specific to the GIPH1 card. The subjects of IP Telephony, in general, and IP Telephone
installation are covered, in detail, in the Strata CIX and MAS Installation and Maintenance Manual.
The GIPH1 printed circuit board (PCB) provides the interface for Toshiba IPT telephones, SIP
telephones, the Strata MAS for SES and ACD, and StrataNet applications.
The GIPH1 has an IP network connector and an RJ-11 connector to provide an RS-232
maintenance port.
The GIPH1 must have a static public IP address or a static private IP Address.
The GIPH1 has up to eight IP channels. These channels can be used for IP Stations, SIP stations,
ACD-Voice Announce, Voice Mail, Strata Net, or any mix.
The GIPH1 operates on the network at 100 Mbps and can be connected to a fast switch router,
LAN, WAN, etc. When connecting to remote IP telephones over the Internet, a VPN router is
needed to circumvent Network Address Translation (NAT) and fire wall issues.
IP Telephone, SIP Telephone, SoftIPT and Strata Net IP channels require licensing. Refer to
“CIX40 System Licenses” on page 1-3
To Next Page
Loading...
