Toshiba Strata CIX40 - CIX40 Default Initialized Data

CIX40 Installation
CIX40 Default Initialized Data
1-38 Strata CIX40 Installation & Maintenance 5/06
CIX40 Default Initialized Data
The information in Table 1-18 applies to the GCTU2A processor card IP connection.
• The default programming data shown in Table 1-19 applies even if the option units (GCDU2/
GSTU1/GVPH1) are not mounted. This enables voice mail to be used as is if the GVPH1 is
inserted. Default programming accommodates the other options similarly.
• When GCDU2 is unmounted, CO4-6 and DKTs 9-16 are “make-busy” and cannot be used.
• When GSTU1 is unmounted, SLT2 is not “make busy.”
• When GVPH1 is unmounted, VM ports 1-4 are “make busy.”
Table 1-18 Prog 916 – System IP Address Default Data
FB1 IP Address 192.168.254.253
FB2 Subnet Address 255.255.255.0
FB3 Default Gateway Address 192.168.254.1
Table 1-19 CIX40 Digital Telephone Default Programming Data – Program 205
DKT1~8
DKT1 DKT2 DKT3 DKT4 DKT5 DKT6 DKT7 DKT8
FB7
CO6 CO6 CO6 CO6 CO6 CO6 CO6 CO6
FB6
CO5 CO5 CO5 CO5 CO5 CO5 CO5 CO5
FB5
CO4 CO4 CO4 CO4 CO4 CO4 CO4 CO4
FB4 CO3 CO3 CO3 CO3 CO3 CO3 CO3 CO3
FB3 CO2 CO2 CO2 CO2 CO2 CO2 CO2 CO2
FB2 CO1 CO1 CO1 CO1 CO1 CO1 CO1 CO1
FB1 PDN 200 201 202 203 204 205 206 207
VMID same as PDN
DKT9~16 (Optional)
DKT9 DKT10 DKT11 DKT12 DKT13 DKT14 DKT15 DKT16
FB7
CO6 CO6 CO6 CO6 CO6 CO6 CO6 CO6
FB6
CO5 CO5 CO5 CO5 CO5 CO5 CO5 CO5
FB5
CO4 CO4 CO4 CO4 CO4 CO4 CO4 CO4
FB4
CO3 CO3 CO3 CO3 CO3 CO3 CO3 CO3
FB3
CO2 CO2 CO2 CO2 CO2 CO2 CO2 CO2
FB2
CO1 CO1 CO1 CO1 CO1 CO1 CO1 CO1
FB1 PDN 209 210 211 212 213 214 215 216
VMID same as PDN
Table 1-20 Program 204 Default Data
In Program 204, all telephones are programmed as 20 buttons.