Toshiba TECRA A4 - Hardware Configuration Settings

4 Replacement Procedures
Removing the Cooling Module.......................................................................... 4-27
Install Cooling Module ...................................................................................... 4-29
4.5 CPU.......................................................................................................................... 4-30
Removing the CPU ............................................................................................ 4-30
Installing the CPU.............................................................................................. 4-31
4.6 Speaker Cover and Keyboard .................................................................................. 4-33
Removing the Speaker Cover and Keyboard..................................................... 4-33
Installing the Speaker Cover and Keyboard ...................................................... 4-34
4.7 Bluetooth Card......................................................................................................... 4-35
Removing the Bluetooth Card ........................................................................... 4-35
Installing the Bluetooth Card............................................................................. 4-36
4.8 ODD Bay Module .................................................................................................... 4-37
Removing the ODD Bay Module ...................................................................... 4-37
Installing the ODD Bay Module........................................................................ 4-38
Disassembling the ODD Drive .......................................................................... 4-39
Assembling the ODD Drive............................................................................... 4-39
4.9 Display Assembly .................................................................................................... 4-40
Removing the Display Assembly....................................................................... 4-40
Installing the Display Assembly ........................................................................ 4-41
4.10 Top Cover ................................................................................................................ 4-42
Removing the Cooling Module.......................................................................... 4-42
Installing the Top Cover .................................................................................... 4-44
4.11 System Board, Speaker and MIC, AC-IN, RJ11/45, MDC cable............................ 4-45
Removing the System Board, Speaker and MIC, AC-IN, RJ11/45, MDC cable .. 4-
45
Installing the System Board, Speaker and MIC, AC-IN, RJ11/45, MDC cable 4-47
4.12 VGA Board .............................................................................................................. 4-48
Removing the VGA Board................................................................................. 4-48
Installing the VGA Board .................................................................................. 4-49
Install the touch pad according to the following procedures and figure 4-34. .. 4-49
4.13 North Bridge thermal module .................................................................................. 4-50
Removing North Bridge thermal module .......................................................... 4-50
4-iv Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual