4 Replacement Procedures 4.3 HDD
4.3 HDD
Removing the HDD
CAUTION: Do not press the top or bottom of the drive.
Applying such pressure can corrupt the data in the drive or
damage the drive.
Remove the HDD (hard disk drive) according to the following procedures and Figures 4-12,
4-13and 4-14.
1. Remove two M2.5x5 black flat-head screws for fixing the HDD cover.
2. Remove the HDD cover.
3. Remove the HDD pack follow the direction of the arrows.
Figure 4-12 Removing the HDD pack cover
4-24 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
To Next Page
Loading...
