4.1 General 4 Replacement Procedures
Installing the PCI Express Card
Install the optional PCI express card according to the following procedures and Figure 4-3,
after checking that the computer is turned off in boot mode.
1. Insert the PCI express card gently until it stops and is seated securely.
2. After checking that the PCI express card is seated securely.
After the PCI express card is installed, check the hardware configuration in the Hardware
Setup or TSETUP program to make sure that the PC card in compatible with the current
hardware configuration.
Satellite M40/M45, TECRA A4, dynabook Vx/4
Maintenance Manual 4-11
To Next Page
Loading...
