4 Replacement Procedures 4.10 Top Cover
4.10 Top Cover
Removing the Top Cover
Remove the top cover according to the following procedures and Figures 4-29 and 4-30.
1. Turn the computer upside down, and remove the following 15 screws:
- Three M2.5x8 black flat-head screws
- Eight M2.5x6 black bind screws
- One M2.5x10 black flat-head screws
- Three M2.5x3 white flat-head screws
Figure 4-29 Removing the screws from the bottom of the computer
2. Restore the normal computer placement.
4-42 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
To Next Page
Loading...
