4.7 Bluetooth Card 4 Replacement Procedures
4.7 Bluetooth Card
Removing the Bluetooth Card
Remove the Bluetooth card according to the following procedures and Figures 4-23.
1. Disconnect the antenna cable with the tweezers.
2. Disconnect the Bluetooth SUMI-card connector CN3 on main board.
3. Remove two M2x3 white bind screws.
4. Remove the Bluetooth card.
Figure 4-23 Removing Bluetooth card
Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual 4-35
To Next Page
Loading...
