3 Diagnostic Programs 3.2 Quick Start
1. Use arrow key to select ‘TouchPad’ item on ‘Peripheral’ in the menu, then press Space
key to select it. (When it is being selected, there is a X marked in the
[ ])
Select ‘Test Mouse’ or press F8 to run the test. The prompt information would be
displayed in the screen as below. This test item needs user to verify whether the mouse
works normally.
The test result will be displayed in the following screen:
4 Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual
To Next Page
Loading...
