Toshiba Tosvert VF-S15 Manual

E6582051
- 42 -
6.5.9. f441 Power running torque limit level 1(Only for the VF-AS3)
f443 Regenerative torque limit level 1(Only for the VF-AS3)
Torque limit level is set up by 0.01% unit and the hexadecimal number.
For example: when “Torque limit level " is set up to “250%”, since the minimum unit is 0.01%,
250%=250÷0.01=25000=61A8H
6.5.10. f460 Speed control response 1(Only for the VF-AS3)
Speed control response is set up by 0.01% unit and the hexadecimal number.
For example: when “Speed control response " is set up to “1.0%”, since the minimum unit is 0.1%,
1%=1÷0.1=10=000AH
6.5.11. f461 Speed control stabilization coefficient 1(Only for the VF-AS3)
Speed control stabilization coefficient is set up by 0.01% unit and the hexadecimal number.
For example: when “Speed control stabilization coefficient " is set up to “1.00%”, since the minimum unit is
0.01%,
1%=1÷0.01=100=0064H

Toshiba Tosvert VF-S15 Specifications

General

Category	Inverter
Control Method	V/f control, Sensorless vector control
Cooling Method	Forced air cooling
Model	Tosvert VF-S15
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus RTU
Overload Capacity	150% for 1 minute
Braking Unit	Built-in braking transistor
Output Voltage	3-Phase, same as input voltage
Operating Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20 to 65°C (-4 to 149°F)
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level
Input Voltage	3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC
Weight	Varies depending on model (e.g., 0.8 kg to 16 kg)