tousek PULL T24 - Page 26

- 26 - tousek / E_PULL-T24-T24speed_49002410 / 06. 08. 2019
After giving the
impulse to program
the end positions, no
other impulse must be
given. Also the safety
devices mustn´t be
triggered. This would
lead to an interruption
of the programming
process.
5
conrm
additional options (with „-“ button):
 radio ege TX
 TX 400
7
5
6
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
side safety edge $$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
side safety edge
active
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
side safety edge
not active
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
opening direct. $$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
opening direct.
<<<--- left
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
opening direct.
--->>> right
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
operating mode $$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
operating mode
Impulse mode
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
operating mode
auto. close 5s
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
operating mode
aut. close 10s
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
system test
photocell
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
system test
main safety edge
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
system test
side safety edge
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
limit positions
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
open position
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
close position
being detected
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
ready
5
6
7
8
conrm
conrm
conrm
Time:
1–255s
e.g. 10s
With the use of a backup
battery please connect now
the battery ! (point 5.1)
change ? YES
change ? YES
change ? YES
Impulse with
impulse button
or transmitter.