34
Make sure that there is nothing under the platform! Ensure
that the mark on the gate points to the mark on the platform.
Then move the lifting platform to the lowest position.
Unlock the gate by turning the lock pin 180 °.
Use the handle to open the gate.
Then the aircraft tug can be driven from the side (or, depen-
ding on the conguration, also from the front / rear) under
the nose wheel.
The adapters can be adjusted accordingly for nose wheels of
dierent sizes. For this purpose, the nose wheel spacers are
hooked into the mount according to the wheel size. Before
picking up the nose wheel, only the two front spacers (in the
pick-up direction) are attached, after picking up the two rear
spacers will be hung in.
To Next Page
Loading...