TF5 - Manual
27
Power Switch
O
On
Channel Switch
(at Radio Interference)
Channel Switch
(at Radio Interference)
Must be operated simulatneously
Press for 5 Secons
Backup-Cable
Connection
Reactivate from
Secure Mode
Force Reset of
electrical Components
4.2 Turning the Remote Control On and Off
To turn on the radio transmitter, the side-mounted rotary switch is moved to the corresponding
position. This is marked ON or OFF.
4.3 Battery charger and battery of the Remote Control
The power supply of the remote control is carried out by me-
ans of a nickel metal hydride battery. The scope of delivery
always includes two batteries.
One of the batteries charges in the front compartment during
operation of the aircraft tug. The other battery is intended for
operation in the transmitter.
4.4 Battery Removal of the Remote Control
1. Press the orange Lock
2. Slide the battery to the side and remove it
Inserting the Battery is done in reverse order.
Note: If the transmitter is not used for a long time, the battery must be removed
from the transmitter and charged at least every four weeks. This prevents deep
discharge and thus damage to the battery.
Note: If it is foreseeable that the aircraft tug will not be used for more than
60 seconds, the radio transmitter should always be deactivated immediately.
Side View Right Side View Left
Charger of the RC-Battery
To Next Page
Loading...