95
4. Disable DHCP:
1 ) Go to Network > DHCP Server;
2 ) Deselect Enable DHCP Server;
3 ) Click Save.
Now you can login to the web management page, click Advanced > Status > Wireless
to check the WDS status. When the WDS status is Run, it means WDS bridging is
successfully built.
Q5. I cannot access the Internet even though the configuration is
finished, what can I do?
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced > Status to check Internet status:
As the follow picture shows, if IP Address is a valid IP address, please try the methods
below and try again:
To Next Page
Loading...
