30
Chapter 7
I want to:
Configure the modem router to enable Internet Protocol Television (IPTV) Services.
For example, I already bought IPTV service, but this service can only be delivered
through the Internet. Therefore, I need to configure my modem router first.
How can I do that?
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced > IPTV to open the configuration page.
3. Click Enable IPTV to enable this function.
4. Select your DSL modulation type.
5. If you select VDSL modulation type, check to enable VLAN and set the VLAN ID. If
you select ADSL, fill in PVC parameters (VPI and VCI). VLAN ID and PVC parameters
are all provided by your IPTV service provider.
6. Specify a LAN port for IPTV connection and connect the set-top box to this port.
7. Click Save to make the settings effective.
Done!
Modem router configuration is complete! You may still need to configure settings on
your set-top box before enjoying your IPTV service.
To Next Page
Loading...
