95
Chapter 16
Administrate Your Network
• To Reboot Automatically
1. Locate the Reboot Schedule section and check the box to enable Reboot Schedule.
2. Specify the Reboot Time when the router reboots and Repeat to decide how often
it reboots.
Note:
Before enabling Reboot Schedule, please make sure your router is connected to the internet, then go to Advanced >
Time Settings and choose Get from the Internet to get the correct network time.
3. Click Save.
16. 5. Change the Administrator Account
Admin account is used to log in to the modem router’s web management page. You are
required to set the admin account at first login. You can also change it on the web page.
1. Visit http://tplinkmodem.net, and log in with your TP-Link and the password you set
for the router.
2. Go to Advanced > System Tools > Administration page. Locate the Account
Management section.
3. Enter the old password. Enter the new password and enter again to confirm.
To Next Page
Loading...
