51
Chapter 12
Network Security
1 ) Click San and the Device Name and MAC Address will be automatically filled in.
Or enter the Device Name and MAC Address manually.
2 ) Click Save.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Blacklist or Whitelist.
12. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the Binding list, but an unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced > Security > IP & MAC Binding and enable IP & MAC Binding.
3. Bind your device(s) according to your needs.
To Next Page
Loading...
