59
Chapter 13
Customize Your Network Settings
1 ) Select the RADVD as the address type to make the controller assign IPv6
address prefixes to hosts.
Note:
Do not select the Enable check boxes to enable RDNSS and ULA Prefix unless required by your ISP. Otherwise
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact
our technical support.
2 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a
specific IPv6 site prefix, select Static and enter the prefix.
3 ) Keep WAN Connection as the default setting.
4. Click Save to make the settings effective.
13. 2. 2. Configure the DHCPv6 Server Address Type
1. Visit http://tplinkwifi.net, and log in with the password you set for the controller.
2. Go to Advanced > Network > LAN Settings.
3. Select IPv6 to configure IPv6 LAN parameters.
To Next Page
Loading...
