86
Chapter 14
Manage Your Controller
• Enable SNMP Agent/SNMP Agent for WAN: Turn on to enable the built-in SNMP agent
that allows the controller to operate as the operational role in receiving and processing
of SNMP messages, sending responses to the SNMP manager, and triggering SNMP
traps when an event occurs.
•
Read-only Community: Displays the default public community string that protects the
controller from unauthorized access.
•
Write Community: Displays the default write community string that protects the
controller from unauthorized changes.
•
System Name: Displays the administratively-assigned name for this managed device.
•
System Description: Displays the textual description of the managed device. This
value should include the full name and version identification of the system’s hardware
type, software operating-system, and networking software.
•
System Location: Displays the physical location of this device (for example, the
telephone closet, 3rd floor).
•
System Contact: Displays the textual identification of the contact person for this
managed device, together with information on how to contact this person.
•
Trap Manager IP: Displays the IP address of the host to receive the traps.
You are suggested to keep the default settings. Click
Save to make the settings effective.
14. 11. Monitor the Internet Traffic Statistics
The Traffic Statistics page displays the network traffic of the LAN, WAN and WLAN sent
and received packets, allowing you to monitor the volume of internet traffic statistics.
To Next Page
Loading...
