39
Chapter 10
Network Security
3 ) Enter the Device Name and MAC Address. (You can copy
and paste the information from Online Devices table if
the device is connected to your network.)
4 ) Click OK.
Now you can block or allow specific client devices to access
your network (via wired or wireless) by Blacklist or Whitelist.
10. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the Binding list, but an unrecognized MAC address.
Prevent ARP spoofing and ARP attacks.
1. Visit http://tplinkwifi.net, and log in with the password you
set for the controller.
2. Go to Advanced > Security > IP & MAC Binding and enable IP
& MAC Binding.
Done!
I want to:
How can I
do that?
To Next Page
Loading...
