88
FAQ
Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the device. If the password has
been changed:
1. Connect your computer to the controller using an Ethernet cable.
2. Visit
http://tplinkwifi.net, and log in with the password you set for the controller.
3. Go to
Basic > Wireless to retrieve or reset your wireless password.
Q2. What should I do if I forget my web management password?
• Press and hold the RESET button on the bottom of the controller for about 5 seconds,
and then visit
http://tplinkwifi.net to create a new login password.
Note: You’ll need to reconfigure the controller to surf the internet once the controller is reset, and please mark down
your new password for future use.
Q3. What should I do if I cannot log in to the controller’s web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the controller correctly and the
corresponding LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
Obtain an IP address
automatically
and Obtain DNS server address automatically.
• Make sure
http://tplinkwifi.net or http://192.168.0.1 is correctly entered.
• Check your computer’s settings:
1 ) Go to
Start > Control Panel > Network and Internet, and click View network
status and tasks
.
2 ) Click
Internet Options on the bottom left.
3 ) Click
Connections and select Never dial a connection.
To Next Page
Loading...
