TP-Link AX1800 - Control LED; Test Internet Connectivity

75
Chapter 14
Manage Your Controller
14. 2. Control LED
The controller LED indicates controller activities and behaviors. You can turn on or turn
off the controller from the management web-page.
1. Visit http://tplinkwifi.net, and log in with the password you set for the controller.
2. Go to Advanced > System Tools > LED Control, and enable Night Mode.
3. Specify the Night Mode Period according to your need, and the LEDs will be off during
this period.
4. Click Save to make the settings effective.
14. 3. Test Internet Connectivity
Diagnostics is used to test the connectivity between the controller and the host or
other network devices.
1. Visit http://tplinkwifi.net, and log in with the password you set for your controller.
2. Go to Advanced > System Tools > Diagnostics.