74
Chapter 14
Manage Your Controller
14. 1. Set System Time
System time is the time displayed while the controller is running. The system time you
configure here will be used for other time-based functions like Parental Controls and
Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1. Visit http://tplinkwifi.net, and log in with the password you set for the controller.
2. Go to Advanced > System Tools > Time Settings page.
3. Configure the system time using the following methods:
Manually: Select your time zone, enter the date and select the local time.
Get from PC: Click this button if you want to use the current time of your PC.
Get from the Internet: Click this button if you want to get time from the internet.
Make sure your controller can access the internet before you select this way to get
system time.
4. Click Save to make the settings effective.
5. After setting the system time, you can set Daylight Saving Time according to your
needs. Select the Enable Daylight Saving Time check box to enable daylight saving,
set the start and end time, and then click Save to make the settings effective.
To Next Page
Loading...
