84
Chapter 14
Manage Your Controller
• CWMP: Enable or disable the CWMP (CPE WAN Management Protocol) function.
•
Inform: Enable or disable the function of sending an inform message to the ACS (Auto
Configuration Server) periodically.
•
Inform DataModel with TR098: Enable or disable the function of sending inform
complying with the data model defined in TR-098.
•
Inform Interval: Set the time interval in seconds when the Inform message will be sent
to the ACS.
•
ACS URL: Enter the web address of the ACS which is provided by your ISP.
•
ACS Username/Password: Enter the username/password to log in to the ACS server.
•
Interface used by TR-069 client: Select which interface to be used by the TR-069
client.
•
Connection Request Authentication: Select this check box to enable authentication
for the connection request.
•
Username/Password: Enter the username/password for the ACS server to log in to
the controller.
To Next Page
Loading...
