TP-Link EAP115 - Page 113

105
Figure 7-48 Client Monitoring
7.3.3.1
User List
Figure 7-49 User List
MAC:
Displays the MAC address of the client.
Access Point:
Displays the name of the device to which the client is connected.
SSID:
Displays the SSID the client is connected to.
SNR(dB):
Signal to Noise Ratio,
the power ratio between the received wireless signal
strength and the environmental noise strength. The bigger the value of SNR, the
better network performance the device provides.
CCQ(%):
Displays the wireless Client Connection Quality (CCQ). CCQ refers to the ratio of
current effective transmission bandwidth and the t
heoretically maximum
available bandwidth. CCQ reflects the actual link condition.
Rate(Mbps):
Displays the data rate at which the client transmits wireless packets.
Down(Byte):
Displays the throughput of the downstream data.
Up(Byte):
Displays the throughput of the upstream data.