TP-Link EAP115 - MAC Filtering

36
Here is the explanation of Figure 6-29: The policy name is Policy 1. Clients with IP address range
192.168.2.0/24 are able to visit IP range 10.10.10.0/24. Policy 1 is enabled.
Click to edit the policy. Click to delete the policy.
6.3.3 MAC Filtering
MAC Filtering uses MAC addresses to determine whether one host can access the wireless
network or not. Thereby it can effectively control the user access in the wireless network.
Figure 6-27 MAC Filtering Page
 Settings
Enable MAC Filtering:
Check the box to enable MAC Filtering.
 Station MAC Group
Follow the steps below to add MAC groups.
Step 1:
Click , two tables will be shown.