TP-Link EAP115 - Mode Switching; Choose the Work Mode the First Time You Login

9
 Standalone
The web management page of the EAP in Standalone mode.
Figure 5-2 Web Management Page in Standalone Mode
5.2 Mode Switching
The management mode Cluster and Standalone can be switched with each other on every single
EAP. The switching operation is shown below.
5.2.1 Choose the Work Mode the First Time You Login
Choose the work mode in the drop-down box the first time you log in. With factory default
settings, the EAP works in Standalone mode. When you choose the work mode as Cluster, the
EAP will reboot and switch to Cluster mode.
Figure 5-3 Choose the work mode