TP-Link EAP115 - Client

104
Figure 7-47 SSID List
SSID Name:
Displays the SSID name. If you want to modify it, please refer to 7.2.1.2 SSIDs
.
VLAN ID:
Displays the VLAN which the SSID belongs to. If you want to change the VLAN
ID, please refer to 7.2.1.2 SSIDs
.
Num of Clients:
Displays the number of clients connected to the SSID. If you want to get more
information about these clients, please refer to 7.2.1.2 SSIDs
.
SSID Broadcast:
Displays the enabling or disabling of SSID broadcast. If you want to modify it,
please refer to 7.2.1.2 SSIDs
.
Band:
Displays the frequency band the wireless network is operating at.
Security:
Displays the security mode the wireless network is applying. If you want to
modify it, please refer to 7.2.1.2 SSIDs
.
Portal:
D
isplays the enabling or disabling of Portal. If you want to modify it, please
refer to 7.2.1.2 SSIDs.
MAC Filtering:
D
isplays the enabling or disabling of MAC Filtering. If you want to modify it,
please refer to 7.2.1.2 SSIDs.
Isolation:
Displays the enabling or disabling of SSID Isolation. If you want to modify it,
please refer to 7.2.1.2 SSIDs
.
Down(Byte):
Displays the throughput of the downstream data.
Up(Byte):
Displays the throughput of the upstream data.
7.3.3 Client
From User List, you can monitor the status of all the clients connected to the EAP including those
who are authenticated.