TP-Link EAP115 - Reboot;Reset

67
 Recurring Mode
Figure 6-74 Recurring Mode
Mode: Select Recurring Mode. The configuration is recurring in use.
Time Offset:
Specify the time adding in minutes when Daylight Saving Time comes.
Start/End:
Select starting time and ending time of Daylight Saving Time.
 Date Mode
Figure 6-75 Date Mode
Mode: Select Date Mode.
Time Offset:
Specify the time adding in minutes when Daylight Saving Time comes.
Start/End:
Select starting time and ending time of Daylight Saving Time.
6.6.3 Reboot/Reset
Figure 6-76 Reboot & Reset
Click Reboot to restart the device. Click Reset to restore the device to factory default settings.
NOTE:
Clicking Reboot/Reset will reboot/reset all the EAPs in a cluster.