TP-Link EAP115 - Page 125

117
Time:
Specify the device’s time. Select the number from the drop-down list in time
format HH/MM/SS.
Primary/Secondary
NTP Server:
If you’ve selected Get GMT from an NTP server, please input the primary
NTP sever address and an alternative NTP server address.
7.5.2.2
Daylight Saving
Figure 7-64 Daylight Saving
Daylight Saving:
Enable or disable the DST. DST is disabled by default.
Mode:
Options include Predefined Mode, Recurring Mode and Date Mode. Please
refer to the following content for more information.
 Predefined Mode
Figure 7-65 Predefined Mode
Mode: Select Predefined Mode.
Predefine Country:
Select a predefined DST configuration. Europe is the predefined country
by default.
 USA: Second Sunday in March, 02:00 ~ First Sunday in November, 02:00
 European: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00
 Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00
 New Zealand: Last Sunday in September, 02:00 ~ First Sunday in April,
03:00