97
Profile and enter the correct parameters, then select the new profile from the
Profile Name list.
2 ) Go to Advanced > Network > PIN Management to verify if PIN is required. If it is,
enter the correct PIN provided by your ISP, and click Save.
3 ) Go to Advanced > Network > Data Settings to verify if the Total/Monthly Used
exceeds the Total/Monthly Allowance. If it does, click Correct and set Total/
Monthly Used to 0 (zero), or disable Data Limit.
4 ) Go to Advanced > Network > Mobile WAN to verify that Mobile Data is enabled.
If it is not, enable it to access the internet.
5 ) Confirm with your ISP if you are in a roaming service area. If you are, go to
Advanced > Network > Mobile WAN to enable Data Roaming.
6 ) Confirm the selection of Antenna Type.
If it is determined that an external antenna is connected, enable External Antennas.
If you are sure that no external antenna is connected, disable External Antennas.
To Next Page