TP-Link Tapo RV30 Max Plus - Frequently Asked Questions

18
Question Answer
How much time does it
take to charge the robot
vacuum?
It takes about 4 hours to fully charge the robot vacuum.
No. The cleaning agents may corrode the water tank or aect the lifetime of your
robot vacuum. Please add only water to the water tank.
The robot vacuum is not waterproof and should not operate on wet surfaces. Ensure
you clean up any water in damp environments like bathrooms before use to prevent
damage from liquids entering the robot vacuum.
The robot vacuum can clean most oor types, such as hard oors, hardwood, tile,
marble oors, carpet (not high-pile carpet), rugs, etc. For optimal performance, we
recommend either removing high-pile carpets or setting specic carpet areas in the
Tapo app.
Can the robot
vacuum work on a
wet surface?
Can I add my preferred
cleaning agents to the
water tank?
What oor types
does the robot
vacuum support?
Frequently Asked Questions (FAQ)
10
Scan for more
If the corresponding issues cannot be solved by referring to the above methods, please contact our Technical Support
at https://www.tp-link.com/support/contact-technical-support/.
Scan for Support