EasyManua.ls Logo

TP-Link TD-W8910G - Chapter 3. Hardware Installation Guide

TP-Link TD-W8910G
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TD-W8910G 54M Wireless ADSL2+ Router User Guide
5
Chapter 3. Hardware Installation Guide
3.1 The Front Panel
The Router’s LEDs are located on the front panel.
Figure 3-1
The LED indicators on the front panel include the Power, System, ADSL, WLAN and 1-4 (LAN).
The ADSL, WLAN and 1-4 (LAN) indicators monitor link status and activity (Link/Act).
3.2 LED Explanation
Name Status Description
Off No Power
Power
On Power on
Off The Router has an error
On The Router is initializing
System
Flashing The Router is working properly
Off Disconnected the LINE port
On Connected the LINE port to ISP network
Slow flash Connecting to the ISP network
ADSL
Quick flash Sending or receiving data
Off The Wireless function is disabled
Slow flash The Wireless function is enabled
WLAN
Quick flash Sending or receiving data over wireless network
1-4
Off There is no device linked to the corresponding port

Other manuals for TP-Link TD-W8910G

Related product manuals