Wireless Statistics”, and then you can see the MAC
Address, Current Status, Received Packets and Sent Packets for each connected wireless
station.
Figure 5-15 Guest Network – Wireless Statistics
MAC Address - The connected wireless station's MAC address.
Current Status - The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP /
AP-DOWN / Disconnected.
Received Packets - Packets received by the station.
Sent Packets - Packets sent by the station.
Configure - The button is used for loading the item to the Wireless MAC Filtering list.
Deny: if the Wireless MAC Filtering function enable, deny the station to access.
Allow: if the Wireless MAC Filtering function enable, allow the station to access.
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go
to the next page and click the Previous button to return to the previous page.
Note:
This page will be refreshed automatically every 5 seconds.
5.9 DHCP
The configuration is similar to DHCP in 3G/4G Router mode. Please refer to 4.10 DHCP.
5.10 Forwarding
The configuration is similar to Fowarding in 3G/4G Router mode. Please refer to 4.11
Forwarding.
-101-
To Next Page
Loading...
