LAN”, You can configure the IP parameters of LAN on this page.
Figure 4-10 LAN
MAC Address - The physical address of the LAN ports, as seen from the LAN. The value
cannot be changed.
IP Address - Enter the IP address of your Router in dotted-decimal notation (factory
default - 192.168.1.1).
Subnet Mask - An address code that determines the size of the network. Usually it is
255.255.255.0.
Note:
1. If you change the LAN IP address, you must use the new IP address to login to the router.
2. If the new LAN IP address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically, but the Virtual Server
and DMZ Host will not take effect until they are re-configured.
Click the Save button to save your settings.
4.7 SMS
Figure 4-11 Wireless menu
There are five submenus under the Wireless menu (shown in
Figure 4-11): Inbox, New
Message, Outbox, Draft Box, SMS Settings. Click any of them, and you will be able to
configure the corresponding function.
-28-
To Next Page
Loading...
