EasyManua.ls Logo

TP-Link TL-MR6400 - Chapter 2: Connecting the Router; System and Installation Requirements; Step-by-Step Connection Guide

TP-Link TL-MR6400
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-MR6400
300Mbps Wireless N 4G LTE Router
Chapter 2. Connecting the router
2.1 System Requirements
SIM card with Internet access enabled
PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors
TCP/IP protocol on each PC
Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari
2.2 Installation Environment Requirements
Place the router in a well-ventilated place far from any heater or heating vent
Avoid direct irradiation of any strong light (such as sunlight)
Keep at least 2 inches (5 cm) of clear space around the router
Operating Temperature: 0~40 (32~104)
Operating Humidity: 10%~90%RH, Non-condensing
2.3 Connecting the router
The router supports two modes, 3G/4G router mode and Standard Wireless Router mode.
You can deploy the mode appropriate to your actual network environment. To connect the router,
please take the following steps for different modes.
a. 3G/4G Router Mode
In 3G/4G router mode, with a 3G/4G SIM card, this Router can join a 3G/4G network as well as
act as a wireless central hub to broadcast its SSID. Thus, the other wireless devices can
connect to the router so as to join the same 3G/4G network.
-6-

Table of Contents

Other manuals for TP-Link TL-MR6400

Related product manuals