8. Set your wireless parameters. It’s recommended that you edit the following two items, and
then click Next.
1) Create a unique and easy-to-remember Wireless Network Name.
2) Select WPA-PSK/WPA2-PSK under Wireless Security and enter a password in the
field.
Figure 3-6 Quick Setup – Wireless
9. Click Finish to make the settings take effect.
Figure 3-7 Quick Setup – Finish
3.2 Standard Wireless Router Mode
1. Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If
you need instructions as to how to do this, please refer to Appendix B: Configuring the PC
.
2. Connect your computer to the router (wired or wireless).
Wired: Connect your computer to the router's LAN port via an Ethernet cable.
-11-
To Next Page
Loading...
