Note:
The current configuration will be covered with the uploading configuration file. Wrong process will
lead this device unmanaged. The restoring process lasts for 20 seconds and this device will
restart automatically then. Keep the power of this device on during the process, in case of any
damage.
5.19.7 Reboot
Choose menu “System Tools
Reboot”, you can click the Reboot button to reboot the
router.
Figure 5-37 Reboot the router
Some settings of the router will take effect only after rebooting, which include
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Web Management Port.
• Upgrade the firmware of this device (system will reboot automatically).
• Restore this device's settings to the factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
5.19.8 TR069
TR-069 is a protocol for communication between a CPE and Auto-Configuration Server (ACS)
that encompasses secure auto-configuration as well as other CPE management functions
within a common framework.
-118-
To Next Page
Loading...
